LootX

Opening options and linking groups

Updated October 1, 2026 This page as PDF

All ways to open a coin with lootx://: selected panel, linking group, new panel, tab or window, all-exchanges, level with the coin — ready links and a comparison.

The same coin can open in the terminal in different ways: in the panel the user is looking at now, across their whole linking group, in a new tab or window, or immediately on all exchanges. This page lists every option — with ready links, an explanation of what will happen in the terminal, and a hint when to use each.

Basics and a sample button are in Button “Open in LootX”, the full list of parameters is in the lootx:// deep-links reference.

What composes an opening variant

The coin in the link is almost always specified the same way — t=EXCHANGE:SYMBOL, with .P for a perpetual futures contract. Three other parameters define the opening variant:

Question Parameter Values
Where to open target selected panel · only linking group · new tab · new window
Which group to link to link 1–100 — group, active — “To active window”, 0 — no group
Which panel to create if a new one is made layout order book, chart, time and sales, liquidity map, combos, all-exchanges

Without these parameters the link acts as the default variant — it changes the coin in the selected panel.

Choose a variant

In the panel the user is looking at

TEXT
lootx://open/instrument?t=BINANCE:BTCUSDT.P&src=myapp
  • The coin opens in the selected panel — the panel the user last used.
  • Its linking group and panels set to “To active window” switch along with it — the same behavior as when the user picks a coin from the terminal list.
  • If the selected panel has no coin, for example “Positions”, the coin opens in the first suitable panel on that tab. If there are no suitable panels, a new order book appears on the tab.

Suitable when the user clicks in your service and immediately looks at the terminal: screener, signals table, news feed.

In the selected panel and in the linking group

TEXT
lootx://open/instrument?t=BINANCE:BTCUSDT.P&link=3&src=myapp
  • The selected panel gets the coin — same as the default variant.
  • At the same time all panels in group 3 across all terminal windows receive it, including background tabs.
  • The selected panel does not join group 3: its own linking group remains unchanged.

Suitable when the user has a dedicated group “for your service” that should follow every click, and you also need to switch the current panel.

Only in the linking group

TEXT
lootx://open/instrument?t=BINANCE:BTCUSDT.P&link=3&target=group&src=myapp
  • Only panels in group 3 across all windows receive the coin.
  • The selected panel does not change: the user can trade one coin and simultaneously view your signals in a separate group.
  • If the group has no panels, the terminal shows the message ‘Group 3 has no panels (request from “myapp”)’.

To have the terminal create a place instead of showing the message, add ifEmpty=create:

TEXT
lootx://open/instrument?t=BINANCE:BTCUSDT.P&link=3&target=group&ifEmpty=create&src=myapp

If the group is empty, a new panel — an order book or the type specified in layout — will appear on the active tab and immediately join group 3. Subsequent links will arrive in that panel.

Suitable for most screeners. This is the cleanest option: your service manages its own linking group and does not interfere with the rest of the user’s workspace. How to let the user pick a group — see Linking group in your service.

New panel next to the current ones

TEXT
lootx://open/panel?layout=chart&t=BINANCE:BTCUSDT.P&src=myapp

open/panel always creates a new panel — even if the same panel type is already open — and adds it to the active tab. Open panels are not changed. The panel type is set by layout:

layout Panel
orderbook Order book — default
chart Chart
tape time and sales
liqmap Liquidity map
combo1 … combo4 Combo of chart and order books — variants in the reference

With link=5 the new panel immediately joins group 5, and the other panels in that group switch along with it.

In a new tab

TEXT
lootx://open/panel?layout=combo1&t=BINANCE:BTCUSDT.P&target=tab&link=5&src=myapp

The terminal opens a new tab — or uses an existing empty one — names it after the coin and creates the layout panel inside. Without link the panel is not in any linking group.

In a new window

TEXT
lootx://open/panel?layout=chart&t=OKX:ETHUSDT.P&target=window&src=myapp

A new window with the layout panel is brought to the foreground. Since v0.6.53 it opens in the same state as the current one: if the terminal window is maximized, the new one will be maximized too. Useful for a second monitor.

The coin on all exchanges

TEXT
lootx://open/all-exchanges?s=SOLUSDT&src=myapp

The terminal lays out the coin in columns across all exchanges — according to the user’s “All exchanges” settings: the set and order of exchanges, spot and futures, chart position.

  • Each column gets its own linking group automatically, so columns do not interfere with each other or with other panels.
  • Without target the layout opens where the user has configured it. target=tab — always a new tab, target=window — always a new window.
  • The exchange itself is irrelevant here; only the symbol is needed: even t=HTX:BTCUSDT will lay out BTCUSDT across LootX exchanges.
TEXT
lootx://open/all-exchanges?s=SOLUSDT&target=window&src=myapp

Suitable for arbitrage and analytics services: the user immediately compares order books for the same coin across venues.

Open and immediately mark a level

TEXT
lootx://open/instrument?t=BINANCE:BTCUSDT.P&level=64821.5&link=3&target=group&src=myapp

The level parameter can be added to any opening variant: the terminal first opens the coin according to target and link, then places a horizontal level at price 64821.5. The level is attributed to your src, and can later be removed with the level/clear command without touching the user’s drawings. More — see Levels from your service.

Switch a group without opening anything

TEXT
lootx://link/set?g=3&t=BINANCE:BTCUSDT.P&src=myapp

All panels of group 3 across all windows switch to the coin. The command does not create panels, open windows, or show messages — even if the group is empty.

link/clear?g=3 clears the coin stored for the group — open panels are not changed.

Just raise the terminal

TEXT
lootx://open/terminal?src=myapp

Brings the terminal window to the foreground — for example, for a “Go to terminal” button next to other actions.

Comparison of variants

Link Selected panel Panels in group What appears
open/instrument Changes together with its group — Order book, if no suitable panel exists
open/instrument + link=3 Changes Group 3 changes Order book, if no suitable panel exists
open/instrument + link=3&target=group Does not change Group 3 changes Nothing; if the group is empty — a message
… + ifEmpty=create Does not change Group 3 changes A panel in group 3 if the group was empty
open/panel Does not change With link — the group changes New panel on the tab
open/panel + target=tab Does not change With link — the group changes New tab
open/panel + target=window Does not change With link — the group changes New window
open/all-exchanges Does not change Each column has its own group “All exchanges” tab or window
link/set?g=3 Does not change Group 3 changes Nothing

Linking group in your service

Terminal panels are grouped into linking groups: changing the coin in one panel switches the whole group. In the terminal UI groups are distinguished by color, in the link they are addressed by number only.

The best pattern for a screener is to let the user pick a group once in your service settings and then send every click to that group. The user does not pick a group on each transition, and the terminal group always shows what they selected in your UI.

To make the choice look familiar, color your groups the same way the terminal does:

Group Color in terminal Color code
1 Red #EF5350
2 Blue #42A5F5
3 Green #66BB6A
4 Orange #FFA726
5 Purple #AB47BC
6 Teal #26C6DA
7 Yellow #FFEE58
8 Pink #EC407A
JavaScript
// The group the user chose in your settings (1–8).
const group = settings.lootxGroup ?? 3;

export function openInLootx(tvSymbol) {
  const query = new URLSearchParams({
    t: tvSymbol,            // "BINANCE:BTCUSDT.P"
    link: String(group),
    target: "group",
    ifEmpty: "create",      // the first click creates the panel in the group
    src: "myscreener",
  });
  location.href = `lootx://open/instrument?${query}`;
}

What happens on the terminal side

Situation What will happen
Terminal is closed Windows will launch LootX. The command waits for the terminal to load and then executes.
Terminal already open The command goes to the running terminal — a second copy is not started.
Window is minimized or covered by other windows On every command the window is restored and brought to the foreground.
Multiple windows are open The command arrives to the active terminal window — the one the user worked in last.
The user clicks many times in a row A new command to the same target replaces the pending one: the terminal will open the last selected coin, not cycle through them all. Level commands are not replaced and are executed in order.
The command failed to execute The terminal shows a message with the name from src — list in the reference.

Recipes

The user picks a group in the screener settings. A click on a row opens the coin in that group and marks the liquidity wall price:

TEXT
lootx://open/instrument?t=BINANCE:SOLUSDT.P&link=3&target=group&ifEmpty=create&level=182.45&src=densityscreener

When the wall is eaten, the screener removes its mark — the user’s drawings remain:

TEXT
lootx://level/clear?t=BINANCE:SOLUSDT.P&price=182.45&src=densityscreener

Each signal opens the coin next to the user’s current work — in a separate window with a combo chart, convenient to keep on a second monitor:

TEXT
lootx://open/panel?layout=combo1&t=BYBIT:ETHUSDT.P&target=window&src=signalbot

For frequent signals it’s better to send the coin to one group rather than opening a window per signal:

TEXT
lootx://open/instrument?t=BYBIT:ETHUSDT.P&link=5&target=group&ifEmpty=create&src=signalbot

Compare a coin across all the user’s exchanges — in a new tab:

TEXT
lootx://open/all-exchanges?s=ETHUSDT&target=tab&src=arbitrage

Open two markets of the same coin — spot and futures — in different groups:

TEXT
lootx://open/instrument?t=BINANCE:ETHUSDT&link=1&target=group&ifEmpty=create&src=arbitrage
lootx://open/instrument?t=BINANCE:ETHUSDT.P&link=2&target=group&ifEmpty=create&src=arbitrage

One link executes one command: two links are two clicks or two navigations in a single click handler.

Next

FAQ

How do I open a coin without changing the user's current panel?
Send it to a linking group: link=3&target=group. The selected panel won't change, and with ifEmpty=create the terminal will create a panel in the group if it's empty.
What's the difference between open/panel and open/instrument?
open/instrument first looks for an open panel and replaces the coin in it. open/panel always creates a new panel, even if one already exists.
How do I open a coin on all exchanges at once?
Use the link lootx://open/all-exchanges?s=SOLUSDT. The exchanges, their order, and the markets are taken from the user's 'All exchanges' settings; target=tab or target=window selects a tab or a window.
What happens if the terminal is closed?
Windows will launch LootX, and the command will run as soon as the terminal finishes loading. If the terminal is already open, the command is sent to that instance — a second copy won't be started.